Installation manual

SRE-1550 03-18-2008

NOTE:

THE STANDARD

STAIRWAY ELEVATOR

IS SUITABLE FOR

STAIRWAY ANGLES UP

TO 45 DEGREES.

Be sure you have all

necessary

parts and tools before

traveling to

installation site.

• protractor level, builder's level

• socket set, metric (10 mm through 22 m)

• ratchet, with 6" extension

• combination wrench set, metric (22 mm through 36 mm)

• Phillips screwdrivers

• slotted screwdrivers

• Allen wrenches, metric (4 mm minimum size)

• electric drill with letter `O' (.316") and 1/4" bit

• hacksaw with 2 or 3 blades, or metal cutting

bandsaw

• 20' tape measure

• small rubber mallet

• C-clamp

• ashlight

• 5/16" open-end wrench

• needle nose pliers

• scissors or knife

• extension cord

• double-sided foam tape

• le

• 12" adjustable wrench

• additional hardware for installation on oor surface(s)

other than wood

Bruno ships the Stairway Elevator with fasteners

appropriate for WOODEN STAIR TREADS ONLY.

Other stair material may require different fasteners.

Please contact Bruno Independent Living Aids, Inc.

for information.

INSTALLATION

Necessary Tools