Installation manual

SRE-1550 03-18-2008

UNIT DOES NOT

SHUT OFF WHEN IT

HITS THE BUMPER

AT THE END OF THE

RAIL

UNIT WILL NOT

OPERATE WITH

CALL / SEND

REMOTE

UNIT OPERATES

ERRATICALLY OR

INTERMITTENTLY

WITH A RIDER

USING THE

ARMREST-MOUNTED

CONTROL SWITCH

UNIT WILL NOT

OPERATE UNLESS

THE SEAT IS

POSITIONED SO THAT

IT FACES THE OPEN

SIDE OF THE STAIRS

• Check swivel seat safety switch.

• Check that the footrest safety tray is not dragging on

the stair nosing or hitting debris on the stairs.

If necessary, reposition the stair rail

mounting brackets to correct the problem.

• Check the rail for debris that may contact safety

switches (footrest and carriage panels).

• This is correct lift operation.

• A safety switch in the seat swivel prevents the unit

from operating with the seat "out of position".

• Check batteries in remote call/send unit.

• Aim transmiter at the carriage

• Transmitters must be `learned' to receiver.

• Connections were not made correctly when changing

unit from left-side to right-side installation.

Consult wiring diagram in installation manual.

• Verify correct operation of limit switch in carriage

assembly.

• Wipe down rail.

• Apply a small amount of grease to the

gear rack only

ROUGH OR

CHATTERING RIDE

TROUBLESHOOTING