Installation manual

©2008,1996 BRUNO INDEPENDENT LIVING AIDS, INC.®
SRE-1550 03-18-2008
34
• Clean rails, racks and wheels. Regrease.
• Check for dry and/or worn belts. Lubricate.
• Check rail wear. There should be no groove.
• Clean charging contacts (both carriage and
rail ends) withScotch Brite®.
• Check battery voltage (load test).
• Check safety switches (footrest, carriage,
seat).
• Check armrest switch and keyswitch (if
applicable).
• Check battery charger output:
• Load test using remote controls:
▫ Check voltage while carriage is
traveling up.
▫ Test with carriage against contacts.
▫ Test with carriage away from contacts.
▫ Check contacts and lights.
• Check speed.
• Check seat belt for wear and proper operation.
• Examine exposed wiring. Are there any
cuts or abrasions?
• Verify operation of seat swivel mechanism.
Does it move easily andlock in place
correctly?
• Check that all hardware is properly tightened.
MAINTENANCE
YEARLY MAINTENANCE OPERATIONS