Installation manual

SRE-1550 03-18-2008

RESIDENTIAL

INFRARED CALL/SEND TRANSMITTER

The call/send system on the Bruno SRE-1550 is

based on infrared (IR) controls.

Like a television remote, the SRE-1550 hand-held

transmitter may experience certain types of inter-

ference. Receivers are mounted on both sides of

the SRE-1550 carriage to minimize interference.

Should interference occur, the unit will stop. This

feature has been integrated into the SRE-1550 to

ensure your safety.

The direct line between the transmitter to either

of the (2) transmitters should be clear of obstacles

for optimal operation.

It may be necessary to reposition the transmitters

so that they are aimed at the carriage.

To reduce the possibility of interference:

• While riding in the seat, ALWAYS operate the

Elevator using the rocker switch on the armrest.

Operating the SRE-1550 with a transmitter

while riding in the seat can lead to signal

interference.

• DO NOT mount the transmitters behind an

obstacle such as a rail post.

• DO NOT allow direct sunlight to shine on the

receivers (blinding the receivers on the carriage).

• DO replace transmitter batteries regularly.

Depleted or nearly-depleted batteries alter the

effective range of the transmitter.

• DO keep the transmitter and receiver lens free of

dirt and debris.

Use a non-abrasive cleaner suitable for glass

or acrylic surfaces.

Do not use polishes or cleaning products

containing wax.These products will leave a

lm on the lens that will reduce the signal

transmission range.

ELECTRICAL