Instructions

3. Push the hose with the suction-probe onto the
pump socket and push the drain hose onto the
the drain socket and fasten both by using hose-
clamps in order to avoid the hoses coming loose
due to the oil-pressure.
4. Unwind the suction-probe and straighten it pro-
perly before inserting through the dipstick-tube
into the engine. Otherwise the pump will draw no
or not enough oil.
5. Insert the suction-probe into the oil dipstick-tube
and push it gently down to the lowest position of
the oil-pan.
6. Please use suitable container to collect the old
oil and lead the drain-hose into this container.
7. Connect the oil-extractor to the 12V car-battery.
Make sure that the clamps are connected with
the correct poles of the battery (red clamp to
„plus“, black clamp to „minus“)
8. Switch the pump on and pump the oil out of the
engine.
9. As soon as no further oil is pumped, switch off
the pump. Do not let the pump run without oil.
10. Fill the engine with fresh motor-oil according to
the maintenance instruction for your car and
check the oil-level with the oil dip-stick.
11. After finishing your work clean the pump
thoroughly by pumping some fresh oil.
12. Remove the hoses from the pump, plug them
together and store the whole unit in a place,
where it is protected against dust.
ATTENTION:
Never let old or fresh oil seep into the ground or
into the sewage system. You will harm the
environment and you will make yourself liable for
prosecution. Collect the old oil and dispose at
your local collecting station, petrol-station or oil-
dealer.
2 years warranty
The warranty for this tool starts at the date of
purchase. Please provide your purchase bill as proof.
This warranty includes:
• repair of operational failures
• replacement of faulty parts
• qualified service and installation
provided that the failure does not result of wrong
handling.
Please do not hesitate to contact us for any further
queries:
Brüder Mannesmann Werkzeuge GmbH
Abt. Reparatur - Service
Lempstrasse 24
D-42859 Remscheid
phone: (0)2191 / 37 14 71
fax: (0)2191 / 38 64 77
Old Power Tools and Protection of the
Environment
• If your electrical appliance is used so intensely
that it must be replaced, or you have no more
use for it, you are obligated to dispose of the
appliance at a recycling center.
• Contact your municipal waste collection service
or your local authorities to find out where you can
recycle your power tool.
• Power tools contain valuable raw materials that
can be recycled. You will contribute to recycling
valuable raw materials by handing your tool in at
a municipal waste collection site.
• Power tools also contain substances that may be
harmful to the environment and humans if
disposed off improperly.
• The symbol with the crossed-out dustbin means
that you must take this tool to a waste
collection facility for the separate
collection of electrical and electronic
equipment.