Installation Guide
TRANSITIONINSTALLATION
Carefully roll the stair nose into place against the Carefully roll the stair nose into place against the
front of the step, making sure the transition is in front of the step, making sure the transition is in
place. Once the transition is in its deplace. Once the transition is in its desired position,
press down rmly over the entire stair nose, making
certain the transition is in place and tight against
the riser. For added security, use nishing nails.
Let the adhesive cure Let the adhesive cure
according to directions.according to directions.
Apply a generous
bead of construction
adhesive along the
underside of the stair
nose.
SuboorSuboor
FlooringFlooring
RiserRiser
Always check dimensions of existing stairs, discuss
with end user and make sure to keep records.
Ensure that alternations to sub tread and addition
of nosing maintains existing stair dimensions or is
to code
WATERPROOF
STAIR NOSE
V-FSN-15
Used to finish the end of a step
*Overlap Installation
Surface: Wear resistant
Core Material: Rigid PVC
Dimension: 2.75”w x 0.84”h
1.77˝
Measure and trim to fit.