Owner`s manual

Assembly Instructions
Step 1
Attach digital control panel and element to outer shell
mounting bracket by sliding controller rails down into rail
channels on bracket mounted on outer pot. Controller
must be correctly attached for appliance to operate. A
built in safety switch on the control panel will prevent this
unit from heating if not mounted properly prior to turning
on electric current to this product.
Step 2
Place aluminum fryer basket inside metal inner pot.
Step 3
Place glass lid on last after assembly of all other parts. Align the notch on the
lid with the metal heating element coils.
Note: Glass lid may not fit tightly when basket is in use during cooking process.