Owner's Manual

18
3 Insert the loaded magazine into the rifle by inserting it into the
magazine well until it is retained in place by the magazine catch.
4 Load the chamber by pressing the bolt unlock button and
simultaneously lifting the bolt handle completely up. Release the
bolt unlock button and draw the bolt completely rearward, then
push the bolt forward and rotate the bolt handle down.
5 Immediately verify that the “safety” is in the on safe position.
THE RIFLE IS NOW READY TO FIRE BY SIMPLY MOVING THE “SAFETY” TO
THE OFF SAFE POSITION AND PULLING THE TRIGGER.
6 Eject the magazine from the rifle by pulling the magazine release
button rearward with your index finger. The magazine will drop
into your hand.
7 Load a single cartridge into the magazine as explained previously.
8 Insert the fully-loaded magazine into the rifle.
SINGLE SHOT LOADING FROM THE MAGAZINE
If you wish to use your X-Bolt as a single-shot rifle, it is recommended
that you use the following single-shot loading procedure.
1 Remove the magazine from the rifle as explained on page 16.
2 Pull the bolt completely rearward and inspect the chamber to make
sure it is empty.
3 Close the bolt and place the “safety” in the on safe position.
4 Load a single cartridge into the magazine.
5 Insert the magazine into the rifle.
6 When ready to shoot, cycle the bolt fully to load the single
cartridge from the magazine into the chamber.