Owner's Manual
16
DO NOT TAMPER WITH THE ASSEMBLY SCREW ON THE REAR OF THE
MAGAZINE. DOING SO WILL RENDER THE MAGAZINE INOPERATIVE.
LOADING
WHEN LOADING YOUR RIFLE ALWAYS KEEP THE MUZZLE POINTED
IN A SAFE DIRECTION, ALWAYS PLACE THE “SAFETY” IN THE ON SAFE
POSITION AND KEEP YOUR FINGERS AWAY FROM THE TRIGGER.
FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS
INJURY OR DEATH.
DO NOT CARRY YOUR RIFLE WITH A CARTRIDGE IN THE CHAMBER TO
AVOID ACCIDENTAL DISCHARGE. WHEN FIRING IS NO LONGER IMMINENT,
MAKE SURE THE “SAFETY” IS IN THE ON SAFE POSITION AND UNLOAD
THE CHAMBER. FAILURE TO FOLLOW THESE WARNINGS COULD RESULT
IN SERIOUS INJURY OR DEATH.
There are two methods used to load a cartridge into the chamber
of the X-Bolt rifle: Loading through the ejection port and loading
from the magazine.
LOADING THE MAGAZINE
1 Eject the magazine from the
rifle by pulling the magazine
release, located on the forward
edge of the magazine, rearward
with your index finger. The
magazine will drop into your
hand (Figure 7).
2 Place the rim of a cartridge on
the front of the follower and
press down on the follower with
the rim of the cartridge while
simultaneously sliding the
FIGURE 7
Press the magazine release rearward. The
magazine will fall into your hand.










