Manual

Although disassembly is rarely necessary ,
the simple steps involved are described below
as well as those required for reassembly. They
will familiarize you with the various parts of
the rifle.
The Browning T-Bolt consists of two basic
units, the stock and the barreled action, (Fig-
ure 1). The receiver, magazine housing, mag-
azine, trigger mechanism, breech bolt and
barrel make up the barreled action. The wal-
nut stock and trigger guard comprise the stock
unit.
DISASSEMBL Y
1. Remove the breech bolt by drawing it
straight rearward to its normal "open" posi-
tion; then depress the trigger and draw the
breech bolt completely from the action.
2. Press the magazine latch rearward and
remove the clip magazine.
3. Loosen the take. down screw.
4. Lift the barreled action from the stock.
5. Under normal circumstances, disassembly
is neither necessary nor advised for adequate
cleaning. I t is only when the rifle has been
heavily exposed to water or dirt that it would
be considered essential.
ASSEMBLY
1. With the breech bolt .removed, merely fit
the action and barrel to the recessed and cut
out portions of the stock. In doing so the trig-
1