Owner's Manual

(Figure 13, page 22). Make

certain the rim of the shell

engages the shell stop and is

held fully inside the magazine

tube. It will make an audible

click when fully inserted.

4 If desired, continue loading the

magazine until it is full.

LOADING THE CHAMBER

MANUALLY FROM

THE MAGAZINE

1 With the bolt closed, depress the

carrier with the front of the shell and, using your thumb, push

the shell into the magazine until the shell is held in place by the

shell stop.

2 If desired, continue to load the magazine, as explained above, to

full capacity.

3 If shooting is imminent, a shell can now be moved from the

magazine to the chamber by pulling back fully on the operating

handle and releasing it forward. A shell will be fed automatically

from the magazine to the chamber as the bolt closes. Another shell

can then be inserted into the magazine to load to full capacity.

THE SHOTGUN IS NOW READY TO FIRE BY SIMPLY MOVING THE “SAFETY”

TO THE OFF SAFE POSITION AND PULLING THE TRIGGER.

LOADING THE CHAMBER THROUGH THE EJECTION PORT

1 Pull the operating handle to the rear until the bolt locks in the

open position. Visually inspect the chamber, feed mechanism and

magazine to make sure they are clear of any obstructions.

2 If shooting is imminent, insert a shell of the proper gauge and

length through the ejection port into the open breech (Figure 14).

FIGURE 14

Insert a shell through the ejection port into

the breech.