User Guide

DISASSEMBLY

CAUTION: WEAR EYE

PROTECTION WHEN

DISASSEMBLING

AND CLEANING

YOUR PISTOL TO

PREVENT THE

POSSIBILITY OF

SPRINGS, SPRING-

TENSIONED PARTS,

SOLVENTS OR

OTHER AGENTS FROM CONTACTING YOUR EYES.

BE CERTAIN YOUR PISTOL IS UNLOADED. REMOVE THE MAGAZINE

AND INSPECT THE CHAMBER. KEEP THE MUZZLE POINTED IN A

SAFE DIRECTION.

1. Be certain the muzzle is pointed in a safe direction. Remove the

magazine. Draw the slide rearward and lock open with the stop open

latch. Visually inspect the chamber to be certain it is empty. Release

the stop open latch and allow the slide to close.

2. Remove scope or optical sight if installed.

3. Remove the two scope base screws and lift the scope base from the

frame. Be careful not

to lose the two lock-

washers (Figure 10).

FIGURE 10

Removing the sight base

FIGURE 11

Removing the guide rod

99611/BUCKRIFLE OM 8/12/03 8:27 AM Page 14