Owner's Manual

INVECTOR-PLUS
™
(20 GA. & 12 GA.)
RIM NOTCHES PATTERN WITH PATTERN WITH
LEAD SHOT STEEL SHOT
Knurled X-Full Turkey
1
**
IFull
*
II Improved Modified
1
Full
2
III Modified Full
2
IIII Improved Cylinder Modified
IIIII Skeet Improved Cylinder
No notches Cylinder Cylinder
*Not for use with steel shot. Using an over-tight choke constriction with steel shot will
result in an ineffective, “blown pattern.”
**Extra Full Special with knurled rim and no rim code. Do not use with steel shot.
1
Available in 12 gauge only.
2
When more than one choke designation is listed for a given steel shot pattern, use the
more open choke listed for high velocity, larger size steel shot loads.
STANDARD INVECTOR
™
(20, 12 & 10 GA.)
RIM NOTCHES PATTERN WITH PATTERN WITH
LEAD SHOT STEEL SHOT
X on side of tube X-Full Special Trap
**
Knurled X-Full Turkey
1
*
IFull
12
*
II Improved Modified Full
3
III Modified
12
Full
3
IIII Improved Cylinder
12
Modified
IIIII Skeet
2
Improved Cylinder
No notches Cylinder
2
Cylinder
*Not for use with steel shot. Using an over-tight choke constriction with steel shot will
result in an ineffective, "blown pattern."
**Extra Full Special with knurled rim and no rim code. Do not use with steel shot.
1
Available in 10 gauge.
2
Available in 20 gauge.
3
When more than one choke designation is listed for a given steel shot pattern, use the
more open choke listed for high velocity, larger size steel shot loads.
21
03-241-BFA-BPS OM w-Duratouch 5/11/05 4:21 PM Page 21