Manual

17
will only serve to collect oil and dirt. To reassemble, reinsert the spring
and follower, then slide the bottom plate back into position.
FURTHER DISASSEMBLY —
NEVER ATTEMPT TO TAKE YOUR LIGHTNING BLR OR LIGHTWEIGHT ‘81 BLR
APART FURTHER THAN EXPLAINED IN THIS MANUAL.
This is a specialized, finely fitted mechanism. You may permanently
mar it by attempting to disassemble the inner mechanism assemblies.
If further disassembly for service or cleaning is required, take your
gun to a Browning recommended Service Center or a competent
gunsmith, or send it to our Arnold, Missouri Service Facility as
explained under “Service or Repair.”
browning.com
02-262-BFA_BLR OM 8/6/03 1:46 PM Page 17