Owner's Manual

NOMENCLATURE

In conventional firearm terminology the position and movement of

firearm parts are described as they occur with the firearm horizontal

and in the normal firing position: i.e., the muzzle is forward or in

front; the buttstock is rearward or to the rear; the trigger is downward

or underneath; the sight is upward or on top. For general parts

nomenclature, refer to Figure 1 on page 9.

SERIAL NUMBER

The serial number is located on the left side of the receiver, above the

trigger guard. Record this number in the space provided at the front

of this owner's manual for future reference.

INITIAL CLEANING

NOTICE! PLEASE TAKE NOTE OF THE FOLLOWING INFORMATION BEFORE

CLEANING YOUR FIREARM.

CLEANING PARTS WITH SPECIAL FINISHES

Be especially careful when cleaning firearms with camouflage,

Dura-Touch

Armor Coating and other special finishes. Always

prevent these surfaces from coming in contact with cleaning solvents,

barrel scrubbers and other strong chemicals. It is preferable to clean

these surfaces with a lightweight gun oil containing no solvents, or

with a damp cloth and mild dish soap (be sure to keep water out of

the action). When cleaning your firearm’s bore and action, protect the

external finishes from any contact with chemicals used. Also, avoid

any contact between external finishes and other strong chemicals like

those found in DEET-containing insect repellents, sunscreens, etc.

Damage to camouflage, Dura-Touch and other finishes caused by

chemicals is irreversible and not repairable.

WEAR EYE PROTECTION WHEN CLEANING YOUR FIREARM TO PREVENT

THE POSSIBILITY OF SOLVENTS OR OTHER AGENTS FROM CONTACTING

YOUR EYES, RESULTING IN INJURY.