Owner's Manual

DO NOT ALTER OR ATTEMPT TO DISASSEMBLE ANY PART OF THE TRIGGER
GROUP OR REMOVE OR DISASSEMBLE THE BOLT MECHANISM.
If any service of the trigger group or bolt becomes necessary, contact
our Service Facility in Arnold, Missouri, or a qualified gunsmith.
TRIGGER GROUP REMOVAL
1 Be certain the rifle is completely unloaded and the “safety” is in
the on safe position.
2 Release the bolt to its forward position by pressing down on the
bolt lock as detailed previously.
3 Push in the two trigger group pins from either the right or left side
of the receiver. Use a non-marring drive punch or similar object,
using care not to scratch the firearm’s receiver (Figure 17). Push the
trigger group pins clear through the receiver and remove them.
4 Grasp the trigger guard and pull the trigger assembly out of the
receiver (Figure 18).
5 Perform any cleaning of the parts and receiver cavity as necessary
using a quality aerosol gun solvent. Allow it to dry completely, then
very lightly oil the moving parts.
33
FIGURE 18
Lift the trigger group from the receiver.
FIGURE 17
Tap the trigger group pins through the receiver.