Owner's Manual

FIREARM’S CALIBER. NEVER USE A MUZZLE BRAKE OR SUPPRESSOR THAT

IS DESIGNED FOR RIMFIRE USE ONLY ON A CENTERFIRE RIFLE. BEFORE

INSTALLING OR REMOVING A MUZZLE BRAKE OR SUPPRESSOR TO/FROM

YOUR FIREARM, READ THIS OWNER’S MANUAL AND ANY OWNER’S

MANUAL INCLUDED WITH THE DEVICE, AND PRECISELY FOLLOW ALL

INSTALLATION AND MAINTENANCE INSTRUCTIONS PROVIDED BY THE

SUPPRESSOR OR MUZZLE BRAKE MANUFACTURER. DURING

INSTALLATION OR REMOVAL, ALWAYS KEEP THE MUZZLE POINTED IN A

SAFE DIRECTION AND MAKE CERTAIN THAT THE FIREARM IS COMPLETELY

UNLOADED, WITH THE MAGAZINE REMOVED AND THE ACTION IN THE

OPEN POSITION.

PERIODICALLY CHECK THE MUZZLE BRAKE OR SUPPRESSOR TO ASSURE

THAT IT IS TIGHT AND FIRMLY SEATED. BEFORE CHECKING, FOLLOW ALL

SAFETY GUIDELINES PREVIOUSLY OUTLINED. ENSURE THE MUZZLE BRAKE

OR SUPPRESSOR IS COOL BEFORE TOUCHING IT.

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN INJURY OR

DEATH TO YOU OR THOSE AROUND YOU!

Most Browning rifles equipped with a muzzle brake also include a

thread protector that can be installed in place of the muzzle brake.

Whether using a thread protector, muzzle brake or suppressor,

be aware that your firearm’s point of impact may change as the

harmonics of the barrel are affected when changing the weight at

the end of the barrel.

CLEANING AND MAINTENANCE SUGGESTIONS

PLEASE TAKE NOTE OF THE FOLLOWING INFORMATION BEFORE CLEANING

YOUR FIREARM.

CLEANING PARTS WITH SPECIAL FINISHES

Be especially careful when cleaning guns with camouflage, Dura-Touch

Armor Coating and other special finishes. Always prevent these

surfaces from coming in contact with cleaning solvents, barrel

scrubbers and other strong chemicals. It is preferable to clean these