Owner's Manual

4 Completely remove the

buttstock from the receiver,

along with the existing shim,

and install the shim you have

selected (Figure 16). Make

certain you have the proper

shim installed and in position

before reattaching the

buttstock and recoil pad.

DO NOT USE MORE THAN ONE SHIM

ON THE BUTTSTOCK

5 When you are satisfied with the fit, reattach the buttstock to the

receiver with the washer and the screw.

6 Snug the stock screw with a screwdriver, do not overtighten.

7 Attach the recoil pad with care, so as not to scratch or mar

the finish of the stock. Wipe any excess petroleum jelly off the

recoil pad.

MUZZLE BRAKES AND SUPPRESSORS

THE ADDITION OF A RECOIL REDUCING MUZZLE BRAKE SIGNIFICANTLY

INCREASES NOISE AND MUZZLE BLAST. YOU, AND EVERYONE IN CLOSE

PROXIMITY TO THE FIREARM, SHOULD ALWAYS WEAR HEARING

PROTECTION TO HELP PREVENT HEARING LOSS OR DAMAGE AND SAFETY

GLASSES TO HELP PREVENT DEBRIS FROM INJURING THE EYES. WHEN

USING A SUPPRESSOR, ALWAYS WEAR HEARING AND EYE PROTECTION.

EVEN THOUGH SOUND IS REDUCED WHEN USING A SUPPRESSOR, THE

NOISE LEVELS ARE STILL SIGNIFICANT ENOUGH TO CAUSE PERMANENT

HEARING LOSS.

ENSURE THAT ANY MUZZLE BRAKE OR SUPPRESSOR THAT YOU INTEND

TO USE ON YOUR FIREARM IS DESIGNED FOR USE WITH YOUR

FIGURE 16

Install the selected shim onto the buttstock.