Owner's Manual

12
The “safety” is located at the rear of the trigger guard. It is designed to
prevent the trigger from being pulled when in the on safe position. In
the off safe position, a red warning band is visible on the safety button
on the left side of the trigger guard.
To place the firearm on safe, push the “safety” button to the right
(Figure 2). To move the “safety” to the off safe or fire position, press
the safety button to the left. This exposes the red warning band on the
“safety” button (Figure 3).
DO NOT DEPEND ON THE RED COLOR ALONE TO INDICATE YOUR
FIREARM’S SAFETY STATUS. TIME, EXPOSURE TO THE ELEMENTS, AND
THE ABRASIVE ACTION OF CLEANING AGENTS CAN ERASE IT. FAILURE TO
FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY OR DEATH.
The “safety” can be reversed from right- to left-handed by a
qualified gunsmith. When installed, the left-handed “safety” will
have the “safety” button’s red warning band on the right side of the
trigger guard.
IF YOU PURCHASED YOUR RIFLE USED, THE “SAFETY” MAY HAVE BEEN
REVERSED FOR A LEFT-HANDED SHOOTER. INSPECT THE “SAFETY” FOR
FIGURE 2
The “safety” shown in the on safe position.
FIGURE 3
The “safety” shown in the off safe position.