Owner's Manual

CLEANING
Various exposed metal parts of your new firearm have been coated
at the factory with a rust preventative compound. Before firing your
rifle, clean the anti-rust compound from the inside of the barrel,
receiver and the action/chamber areas. A high-quality lightweight gun
oil is ideal for removing this compound, and for giving your new
firearm its first lubrication. Clean the barrel using a cleaning rod and
patch as explained under “Cleaning and Maintenance Suggestions” on
pages 26-29.
OPERATION OF THE “SAFETY”
ALWAYS KEEP THE “SAFETY” IN THE ON SAFE POSITION UNLESS
SHOOTING IS IMMINENT. ALWAYS KEEP THE MUZZLE POINTED IN A SAFE
DIRECTION. FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN
SERIOUS INJURY OR DEATH.
The “safety” is located at the rear of the trigger guard. It is designed to
prevent the trigger from being pulled when in the on safe position. In
the off safe position, a red warning band is visible on the safety button
on the left side of the trigger guard.
To place the firearm on safe, push the “safety” button to the right
(Figure 2). To move the “safety” to the off safe or fire position, press
FIGURE 2
The “safety” shown in the on safe position.
FIGURE 3
The “safety” shown in the off safe position.
11