User Guide

CLEANING PROCEDURES — The correct pro-
cedure for cleaning your A-500 shotgun is as follows:
BE CERTAIN YOUR SHOTGUNS
MAGAZINE, FEED MECHANISM AND
CHAMBER ARE UNLOADED. PLACE
THE “SAFETY” IN THE “ON SAFE”
POSITION. ALWAYS WEAR
PROTECTIVE SAFETY GLASSES
DURING ALL DISASSEMBLY AND
CLEANING PROCEDURES.
Remove the barrel so that it can be
cleaned from the breech end (See
“Disassembly. . . ” on page 21).
Using a shotgun cleaning rod with tip and
patch large enough for a snug fit in the
bore, insert the rod and patch in the
breech end of the barrel and run back and
forth through the bore several times.
Remove and wipe the Invector tube, tube
threads and barrel threads, and lightly oil.
Inspect the bore from both ends for
leading by looking through bore toward
light. Leading will appear as dull
longitudinal streaks and is usually more
predominant near the muzzle and just
forward of the chamber.
57