User Guide

VERTICAL ADJUSTMENT — Adjustment of the

sight is controlled by the screw located on top of

the sight. To RAISE the point of impact, turn the

screw in a counterclockwise direction. To

LOWER the point of impact, turn the screw in a

clockwise direction. Vertical adjustment is also a

process of trial and error.

Cleaning and Maintenance

Suggestions

You should clean your A-500 whenever it becomes

excessively dirty — and perform a thorough

cleaning at least once a year. The barrel should

be cleaned, and the action wiped clean and

oiled after every day of shooting. If a malfunction

occurs, perform a thorough cleaning, to see if it

solves the problem, before seeking the services

of a Browning Recommended Service Center,

the Browning Service Facility in Arnold,

Missouri, or a competent gunsmith.

Normal maintenance can be accomplished with

the barrel still attached to the receiver (oiling

and wiping down). More careful cleaning

requires removal of only the barrel from the

receiver (cleaning the barrel). A complete

cleaning requires removal of the breechblock

and trigger group.