User Guide

Open the action and place the “safety” in
the “on safe” position.
Before installing a tube, check the internal
choke tube threads in the muzzle, as well
as the threads on the Invector choke tube
to be sure they are clean. Lightly oil the
threads with an oil like Browning Oil.
Using your fingers, screw the appropriate
tube into the muzzle end of the barrel,
tapered end first, notched end outward. When
it becomes finger-tight, use the Invector
choke wrench to firmly seat the tube.
THE INVECTOR CHOKE TUBE SHOULD BE
PERIODICALLY CHECKED TO ASSURE THAT
IT IS TIGHT AND FlRMLY SEATED- BEFORE
CHECKING, FOLLOW THE SAFETY
GUIDELINES OUTLINED ABOVE.
Replacement and additional tubes and wrenches
are available from your Browning dealer, or by
writing to the Browning Consumer Department,
Route 1, Morgan, Utah 84050. [phone].
Canadian customers please call or write to
Browning Canada Sports Ltd./Ltee, 3167 De
Miniac, St. Laurent, Canada H4S 1S0. [phone].
INVECTOR CHOKE TUBE CODE — To identify
individual Invector tubes, refer to the
abbreviated indications on the side of the tube,
52