User Guide

magazine (it will stop only partially
inserted because of the full magazine).
Apply steady, hard pressure on the shell,
pushing all the shells forward in the magazine
until the magazine spring retainer is
dislodged from its compressed fitting at the
end of the magazine (See Figure 15). You
will feel forward movement of the shells in
the magazine when it is dislodged.
IF IT WILL NOT DISLODGE WITH
STEADY PRESSURE you may have to
work the last shell in and out to increase
force on the shells in the magazine.
If this also fails to dislodge the magazine spring
retainer, place another shell behind the one
44