User Guide

Use of Extra Barrels
On all Browning A-500G shotguns, barrels
of the same gauge are completely
interchangeable, and no special fitting is
required. Thus, by merely buying another
barrel of a different length, or for a different
purpose (such as a Buck Special barrel),
and using the appropriate Invector choke
tube, you have acquired the utility of
another gun at a fraction of the cost of a
new gun; a duck gun becomes a fine
upland game gun, a pheasant gun becomes
a rifled slug deer gun.
Sight Adjustment for Buck Special
Barrels
Buck Special barrels are equipped with a
precision rear sight which is screw
adjustable for both horizontal and vertical
correction.
WINDAGE ADJUSTMENT —
To move point of impact to the RIGHT,
loosen the small screw on the right side of
the sight. Then tighten the small screw on
the left side of the sight. To move point of
impact to the LEFT loosen the small screw
on the left side of the sight and tighten the
screw on the right side. This is a process of
trial and error. Make small adjustments then
check the point of impact.
VERTICAL ADJUSTMENT —
Adjustment of the sight is controlled by the
screw located on top of the sight. To RAISE
the point of impact, turn the screw in a
counterclockwise direction. To LOWER the
point of impact, turn the screw in a
clockwise direction. Vertical adjustment is
also a process of trial and error.
43