User Guide

FIGURE 21

are for Browning guns with back-bored

barrels and are not for use on your A-500G.

Before removing/installing tubes, or reading

the rim notch code, make sure your shotgun

is fully unloaded.

Rim

Notches

Pattern With

Lead Shot

Pattern With

Steel Shot

III

IIII

IIIII

No Notches

Knurled Ext

Full

Imp. Modified

Modified

Imp. Cylinder

Skeet

Cylinder

X-Full Special

Full***

Modified

Imp. Cylinder**

Imp. Cylinder ***

*Not for use with steel shot Using an over-tight choke

constriction with steelshot will result in an ineffective, "blown"

pattern.

**Extra Full Special with knurled rim and no rim code. Do not

use with steel shot.

***When more than one choke designation is listed for a given

steel shot pattern, use the more open choke listed for high

velocity, larger shot size steel shot loads

CAUTION: DO NOT USE STANDARD IN-

MARKED

INVECTOR-PLUS.

DO NOT USE

INVECTOR-PLUS CHOKE TUBES IN BAR-

VECTOR CHOKE TUBES IN BARRELS

RELS MARKED INVECTOR. FAILURE TO

FOLLOW ALL OF THE ABOVE WARNINGS

CAN DAMAGE YOUR GUN AND CAUSE

INJURY TO YOURSELF AND OTHERS.