User Guide

REASSEMBLY WITH THE THREE-SHOT
MAGAZINE ADAPTER INSTALLED.
To reassemble the magazine with the three-
shot adapter installed, first, position the gun
vertically, butt down. Then reinstall the
magazine follower in the magazine tube,
closed end first. Place the three-shot adapter
inside one end of the magazine spring,
small end first. Place the magazine spring
retainer over the top of the adapter. Insert
the other end of the magazine spring into
the magazine tube and compress it into the
magazine tube (See Figure 20). With hand
pressure, seat the magazine spring retainer
fully into the compression fitting on the end
of the magazine tube.
REASSEMBLY WITHOUT THE THREE-
SHOT MAGAZINE ADAPTER.
Reassembly of the magazine without the
three-shot adapter is identical to reassembly
with the three shot adapter, with one
exception: after inserting the magazine
follower into the magazine tube, place the
magazine spring retainer directly on the end
of the magazine spring. Then insert the
other end of the magazine spring into the
magazine tube and compress it into the
magazine tube. With hand pressure, seat the
magazine spring retainer fully into the
38
FIGURE 20