User Guide

30
FIGURE 11
FIGURE 12-A FIGURE 12-B
4. Remove the retaining nut and screw
from the receiver.
5. With the gun inverted (trigger guard up),
grasp the trigger guard and pull it up,
forward and out from the receiver (See
Figure 11).
DO NOT DISASSEMBLE THE TRIGGER
GROUP BEYOND THIS POINT.
Perform all cleaning with the trigger
group kept intact as an assembly.
REMOVING THE BREECHBLOCK —
Normal procedure is to remove the barrel
and trigger group first, as explained
previously.
1. Remove the operating handle as follows: