User Guide

“SAFETY” IS IN THE “ON SAFE” POSI-
Close the breechblock by pressing the
proper gauge through the ejection port
into the open breech (See Figure 7).
above).
Press the breechblock release button.
KEEP YOUR FINGERS CLEAROFTHE
EJECTION PORT.
be picked up and delivered to the cham-
ber correctly. The chamber is now
This will automatically cause the shell to
loaded.
3. With the chamber loaded, load the
magazine to full capacity as explained
below under “Loading the Magazine.”
METHOD TWO: LOADING THE CHAMBER
MANUALLY FROM THE MAGAZINE —
1. Make sure the muzzle is pointed in a
safe direction and the “safety” is in the
“on safe” position.
2. To load the magazine, follow the instruc-
tions under “Loading the Magazine”
listed below. With the magazine loaded,
and the breechblock closed, merely pull
back on the operating handle, fully to
the rear, and release it, allowing the
breechblock to close. This will automati-
cally cycle a shell from the magazine to
the chamber.
3. To again load the magazine to full ca-
pacity, thumb another shell into the
magazine as explained below under
“Loading the Magazine.”
LOADING THE MAGAZINE —
1. MAKE SURE THE MUZZLE IS POINTED
IN A SAFE DIRECTION AND THE
TION.
breechblock release button (as explained
2.
21