Manual

easiest to cant the bolt assembly to the left
and attach the left action bar first, then
rotate the bolt assembly to the right and
downward until the right action bar is en-
gaged.
3. Keeping the action bars located in the
bolt slide with your fingers (Figure
26) carefully orient the bolt assembly
in the appropriate receiver channels
and push rearward on the action bar
assembly until the bolt assembly slides
into the receiver.
Fig. 26
4. Insert the bolt operating handle and
gradually release pressure on the ac-
tion bar assembly.
5. Draw the bolt partially rearward and
insert the trigger group (Figure 27).
Replace the trigger guard retaining pin.
CAUTION: While inserting the trigger
group be careful not to scratch the undersur-
face of the receiver with the carrier cartridge
29