Manual

ing from each side of the magazine tube (Fig-
ure 12). Remove this simply by pushing it
b8Sx:9 _<”
from one side and withdrawing it from the
other (Figure 13). As you do this hold your
ARE UNDER SPRING
RETAIN THEM AS Y
WITHDRAW GAS Pi
finger or thumb against the gas cylinder plug
which protrudes slightly from the forward end
of the magazine tube (Figure 13). This is
necessary because the gas system is under
spring tension.
Now ease the gas system components for-
ward out of the magazine tube. Carefully
note the sequence of parts as you withdraw
them from the magazine tube (Figure 14).
(Continued on page 20)
15