Owner's Manual

Programmer
60
Chapter 2 Programming with Help Function
Carrying out double stitch
Creating double stitch data in the reverse direction to the right side of the sewing path.
If sharp angles or fine curves are included in the pattern sheet, the desired double stitch may
not be achieved.
Values 0.0 to 9.9 mm are available for the double stitch width.
1. Select
, then press .
2. Input the double stitch width and the stitch length, then press .
3. Move the needle with , then press .
Press twice to change the direction of sewing.
Remaining plot count
Distance from the previous point in the
direction of X or Y axis
Stitch length
Double stitch width
Press for selection.