Owner's Manual

Programmer
56
Chapter 2 Programming with Help Function
3. Select with , then press .
4. Input the program number, then press
.
5. Press
ESCESC
.
2
Moving
1. Select with , then press .
2. Select
with , then press .
3. Move the needle with
. Press
when the needle point is at point A of the
pattern.
4. Press
ESCESC
.
3
Saving
Refer to "Writing data" (page 129) for detailed operation.
1. Select with , then press .
2. Select with , then press .
3. Input the program number, then press
.