Owner's Manual

Programmer
43
Chapter 2 Programming with Help Function
3
Programming a new point
1. Select with , then press .
2. Move the needle with
. Press
when the needle point is at 1'.
1' is programmed.
3. Press
ESCESC
.
4
Deleting 1
1. Select with , then press .
2. Press, then press
.
The needle moves to the sewing start position.
3. Press
ESCESC
.
4. Select
with , then press .
5. Input the number of stitches to be deleted,
then press
.
The example is deleting 1 stitch. Press
1
.
6. The needle point moves to 1'.
7. Press
ESCESC
twice.