Owner's Manual

Programmer
37
Chapter 2 Programming with Help Function
4
Ending program
1. Press
P
.
Changing partially
A part of the programmed pattern is changed. The
example in the left is used for explanation of creating
5', 6' and 7'.
1
Calling data
1. Press
P
.
The work clamp comes down and the programmer screen is
displayed.
2. Select with , then press .
3. Select
with , then press .
4. Input the program number, then press
.
5. Press
ESCESC
.
2
Moving to position 4
1. Select with , then press .