Owner's Manual

Programmer
31
Chapter 2 Programming with Help Function
3
Saving
Refer to "Writing data" (page 129) for detailed operation.
1. Select with , then press .
2. Select
with , then press .
3. Input the program number, then press
.
4. Press
ESCESC
.
4
Ending program
1. Press
P
.
Feed
After breaking thread halfway through sewing, a feed
is set to start sewing again from a different position.
The example in the left is used for explanation of
programming an inner pattern with a feed after an
outer pattern.
1
Programming
1. Press
P
.
The work clamp comes down and the programmer screen is
displayed.
2. Select with , then press .