Owner's Manual

Programmer
23
Chapter 2 Programming with Help Function
7. When point C is programmed, press
ESCESC
.
2
Inputting the end code
1. Select with , then press .
2. Press
.
The needle returns to the first stitch(point A).
3. Press
ESCESC
.
The needle returns to the standby position.
3
Saving
Refer to "Writing data"(page 129) for detailed operation.
1. Select with , then press .
2. Select
with , then press .
3. Input the program number, then press
.
4. Press
ESCESC
.
4
Ending program
1. Press
P
.