Owner's Manual

152
Chapter 5 Practical programming examples
Programmer
12. Press
LILI
.
13. Move the needle with . Press
L
when
the needle point is at point M of the pattern.
14. Input the number of stitches to return the needle
to the position where two row switch is input,
then press .
5 is input in the example. The needle moves 5 stitches back.
15. Press
018
, then press
L
.
The screen to set the attributes appear and two row switch is set.
16. Input the number of stitches to proceed the
needle to point M, then press .
5 is input in the example. The needle moves 5 stitches ahead.
17. Press
9
, then press
LILI
.
9
is a command for needle tacking. Input the stitch length
in . 0.5 mm is input in the example.
18. Move the work clamp with . Press
L
when the needle point is at point N of the pattern.
19. Press
LILI
.
20. Move the needle with . Press
L
when
the needle point is at point O of the pattern.
21. Press
M
.
22. Move the needle with . Press
L
when
the needle point is at point P of the pattern.