Owner's Manual

143
Chapter 5 Practical programming examples
Programmer
11. Move the needle with . Press
L
when
the needle point is at point F of the pattern
12. Press
LILI
.
13. Move the needle with . Press
L
when
the needle point is at point G of the pattern
14. Repeat steps 12 and 13 and create the program
to point J.
15. Press
9
, then press
LILI
.
9
is a command for needle tacking. Input the stitch length
in . 0.5 mm is input in the example.
16. Move the needle with . Press
L
when
the needle point is at point A of the pattern.
2
Input the end code
1. Press
E
1
1 1
.
The needle goes back to the sewing start position and the retractable
clamp is positioned outside.