Owner's Manual

Programmer
129
Chapter 4 Reading/Writing Data
Writing data
Writes data from the programmer to a floppy disk.
Be sure to use a formatted 2HD floppy disk. The floppy disk accompanying this product is
already formatted.
Format a 2HD floppy disk according to the procedure described in page 132 if it is not
formatted.
* Data can be written as follows.
* Using the help function
This is not available in the command mode.
* Using the operation panel of the main body.
This is available both in the help mode and the command mode.
1. Select
, then press .
2. Select , then press .
3. Input the number of program with a numeric key.
If there is data, appears.
If there is no data,
appears. If appears, the data is from BAS-760 series.