Owner's Manual

Programmer
126
Chapter 4 Reading/Writing Data
Reading data
Reads data from a floppy disk.
Data can be read as follows.
* Using the help function
The data created with BAS-760 series can also be read. It is not available in the
command mode.
* Using the operation panel of the main body
The data created with BAS-760 series can also be read. It is available both in the help
mode and the command mode.
1. Select , then press .
2. Make sure that is selected, then press .
3. Input the number of program with a numeric key.
If there is data, appears.
If there is no data,
appears. If appears, the data is from BAS-760 series.