Owner's Manual

Programmer
123
Chapter 3 Programming with Command Function
Deleting data
Deletes the data during creating and displaying.
Deleting a part of data
Command to be used
C
Deletes data after stitches.
If this command is used at the sewing start position, the sewing
start position is also deleted and the needle position after
(number of stitches input + 1) stitches becomes the sewing start
position.
C
Deletes data before stitches.
If this command is used at the sewing end position, the end
code is deleted.
1. Move the needle to the desired position.
2. Input the command.
Input
C
to delete data after the current needle position.
Input
C
to delete data before the current needle position.
Deleting program data
Command to be used
R
2
2 2
Deleting all the data input
1. Press
R
2
2 2
.
An alarm sound is issued and input data is deleted.
Displays the number of the command input.
Displays the number of the command input.