Owner's Manual

Chaprter 3 Programming with Command Function
Programmer
101
Moving the shunting point
The position of the shunting point is moved. The example
in the left is used for explanation of moving the shunting
point from A to B.
1
Calling data
1. Specify the program number on the operation
panel, then press
switch to read the data.
Refer to "Using the operation panel of the main body"(page 128)
for detailed operation.
2
Moving to position A
1. Press
1
, then press .
The neddle moves to the shunting point.
3
Programming a new point
1. Press
F
.
2. Move the needle with
. Press
L
when the needle point is at B of the pattern.
B is programmed.
4
Deleting 1
1. Press
1
, then press .
The needle point returns to A.
2. Press
C
.
3. Input the number of stitches to be deleted, then
press .
The example is deleting 1 stitch. Press
1
.