Owner's Manual

61
BAS-364E, 366E, 370E, 375E
OPERATION FLOW CHART
OPERATION FLOW CHART
Power switch ON
Insert floppy disk
Press the PROGRAM
No. select switch
Press the Program
Read/Write switch
Reads program from disk
Work clamp rises
Set the work piece
Work clamp descends
Restart
Start
Depress work clamp
lift switch
Depress work clamp
lift switch
TEST indicator illuminatesTest switch ON
TEST indicator goes outTest switch OFF
Work clamp stops at
sewing start position
Depress start switch
Feed drive (confirm
needle descent, stepping
foot and work clamp
operation)
Feed stop
Depress start switch
Machine, feed operate
Thread trimming
Stop
Work clamp rises
Max. 2,000 rpm or
3,200 rpm
Depress start switch
Power switch ON
Press the PROGRAM
No. select switch
Select the program
Press the Program
Read/ Write switch
Read program from disk
Work clmap rises
(Replace presser foot,
feed plate, confirm
needle descent)
(Set material in place)
Work clamp descends
Press the work clamp
lift switch (if the work
clamp is down)
Depress work clamp
lift switch
To change pattern
Press emergency
stop switch
Machine stops, alarm
sounds
Press emergency
stop switch
Thread trimmer operates,
alarm stops
Remove problem
Work clamp moves one
stitch at a time in reverse
Press STEP BACK
switch
Work clamp stopsPress STEP BACK
switch
One machine cycle completed
When thread breaks or bobbin
thread runs out