Owner's Manual

44
Chapter 8 DEVICES
BAS-364E, 366E, 370E, 375E
Setting the start position
●
At the sewing start position, attach reflector tape w
directly below the jig pattern sensor q (In the position
where the indicator e of the jig pattern sensor q
illuminates).
●
When sewing a stitch pattern with a different work clamp,
set the sewing start position to the new corresponding
position.
●
If the indicator e of the jig pattern sensor q does not
illuminate at the sewing start position, the machine will
stop and sewing will not be possible even if the start
switch is depressed.
●
Whether the jig pattern sensor mechanism can be
moved or not can be change over the memory switch .
7. Jig pattern sensor (Option)
If the work clamp foot is not appropriate for use with the programmed sewing pattern, an error will be displayed and
the machine will enter the emergency stop condition.
e
w
q