FBPL Command Reference
Table Of Contents
- 1 Example of Command Reference
- 2 Document Conventions
- 3 Object Position Calculation
- 4 Supported Printers
- 5 Setup and System Commands
- 5.1 SIZE
- 5.2 GAP
- 5.3 GAPDETECT
- 5.4 BLINEDETECT
- 5.5 AUTODETECT
- 5.6 BLINE
- 5.7 OFFSET
- 5.8 SPEED
- 5.9 DENSITY
- 5.10 DIRECTION
- 5.11 REFERENCE
- 5.12 SHIFT
- 5.13 COUNTRY
- 5.14 CODEPAGE
- 5.15 CLS
- 5.16 FEED
- 5.17 BACKFEED
- 5.18 FORMFEED
- 5.19 HOME
- 5.20 PRINT
- 5.21 SOUND
- 5.22 CUT
- 5.23 LIMITFEED
- 5.24 SELFTEST
- 5.25 EOJ
- 5.26 DELAY
- 5.27 DISPLAY
- 5.28 INITIALPRINTER
- 5.29 MENU
- 6 Label Formatting Commands
- 7 Status Polling and Immediate Commands
- 8 Commands for Windows Driver
- 9 File Management Commands
- 10 BASIC Commands and Functions
- 10.1 ABS()
- 10.2 ASC()
- 10.3 CHR$()
- 10.4 XOR$()
- 10.5 END
- 10.6 EOF()
- 10.7 OPEN
- 10.8 CLOSE
- 10.9 WRITE
- 10.10 READ
- 10.11 SEEK
- 10.12 LOF()
- 10.13 LOC()
- 10.14 FREAD$()
- 10.15 PUT
- 10.16 GET
- 10.17 COPY
- 10.18 FOR…NEXT LOOP
- 10.19 WHILE…WEND
- 10.20 DO…LOOP
- 10.21 IF…THEN…ELSE…ENDIF LOOP
- 10.22 GOSUB…RETURN
- 10.23 GOTO
- 10.24 INP$()
- 10.25 INP()
- 10.26 LOB()
- 10.27 INPUT
- 10.28 PREINPUT
- 10.29 POSTINPUT
- 10.30 SET FILTER
- 10.31 REM
- 10.32 OUT
- 10.33 OUTR
- 10.34 GETKEY()
- 10.35 INT()
- 10.36 LEFT$()
- 10.37 LEN()
- 10.38 MID$()
- 10.39 RIGHT$()
- 10.40 STR$()
- 10.41 STRCOMP()
- 10.42 INSTR()
- 10.43 TRIM$()
- 10.44 LTRIM$()
- 10.45 RTRIM$()
- 10.46 TEXTPIXEL()
- 10.47 BARCODEPIXEL()
- 10.48 VAL()
- 10.49 NOW$()
- 10.50 NOW
- 10.51 FORMAT$()
- 10.52 DATEADD()
- 10.53 FSEARCH()
- 10.54 TOUCHPRESS()
- 10.55 RECORDSET$()
- 10.56 REPLACE$()
- 11 Device Reconfiguration Commands
- 11.1 SET COUNTER
- 11.2 SET CUTTER
- 11.3 SET PARTIAL_CUTTER
- 11.4 SET BACK
- 11.5 SET BACK_BEFORE_PRINT
- 11.6 SET KEYn
- 11.7 SET LEDn
- 11.8 SET PEEL
- 11.9 SET REWIND
- 11.10 SET TEAR
- 11.11 SET GAP
- 11.12 SET BLINE REVERSE / SET BLINE OBVERSE
- 11.13 SET BLINE PRINTSIDE / SET BLINE BACKSIDE
- 11.14 SET HEAD
- 11.15 SET RIBBON
- 11.16 SET ENCODER
- 11.17 SET RIBBONEND
- 11.18 SET COM1
- 11.19 SET PRINTKEY
- 11.20 SET REPRINT
- 11.21 SET FEED_LEN
- 11.22 GETSENSOR()
- 11.23 GETSETTING$()
- 11.24 SET USBHOST
- 11.25 SET AUTORUN
- 11.26 SET RESPONSE
- 11.27 SET DAYLIGHT_SAVE
- 11.28 SET REGISTRATION
- 11.29 PEEL
- 11.30 LED1, LED2, LED3
- 11.31 KEY1, KEY2, KEY3
- 11.32 SET SENSOR_REF
- 12 Printer Global Variables
- 13 Bluetooth Module Setting Commands
- 14 Wi-Fi Module Setting Commands
- 15 Internal Ethernet Setting Commands
- 16 Setting Commands for RJ-2035B/2055WB/3035B/3055WB
- 17 RFID
- 18 General purpose input output (GPIO) Setting Commands
- Appendix A: Command List by Model
- Appendix B: Download your Fonts
Copyright
©2019 Brother Industries, Ltd. All rights reserved.
Information in this document is subject to change without notice. The software described in this document is
furnished under a license agreement. The software may be used or copied only in accordance with the terms of
those agreements. No part of this publication can be reproduced in any form or by any means without prior written
permission of Brother Industries, Ltd.
Trademarks
Any trade names and product names of companies appearing on Brother products, related documents and any
other materials are all trademarks or registered trademarks of those respective companies.
Important Note
This document provides information for the label printer (See 4. Supported Printers) and is available for use only
if you agree to the following conditions:
No Warranty
a. The contents of this document are subject to change without notice.
b. Regarding this document, Brother will not guarantee that there are no defects or if the purpose matches the
specific purpose, regardless of whether it is explicit or implied.
c. Brother assumes no responsibility for damages, actions of third parties, the user's intentional or negligent
operation, misuse, or operation under other special conditions.