DPL Emulation Command Reference
Table Of Contents
- 5 -
Classification
Command
Comment
<STX>M
Set Maximum Label Length
<STX>m
Set Printer to Metric Mode
<STX>n
Set Printer to Imperial Mode
<STX>O
Set Start of Print (SOP) Position
<STX>o
Cycle Cutter
<STX>P
Set Printer to Character (HEX) Dump Mode
<STX>p
Controlled Pause
<STX>Q
Clear All Modules
<STX>q
Clear Module
<STX>R
Ribbon Saver On/Off
<STX>r
Select Reflective Sensor
<STX>S
Set Feed Rate
<STX>s
Set Single Buffer Mode
<STX>t
Test DRAM Memory Module
<STX>U
Label Format String Replacement Field
<STX>V
Software Switch Settings
<STX>v
Request Firmware Version
<STX>X
Set Default Module
<STX>x
Delete File from Module
<STX>y
Select Font Symbol Set
Extended
System-Level
Command
<STX>Kb
Backfeed Time Delay
<STX>Kc
Configuration Set
<STX>KD
Database Configuration
<STX>KE
Character Encoding
<STX>KF
Select Factory Defaults
<STX>Kf
Set Present Distance
<STX>KM
Memory Configuration, Internal Module (Non-Display