P-touch Template Manual/ Command Reference
Table Of Contents
- P-touch Template 2.0 Command Reference
- IMPORTANT - PLEASE READ CAREFULLY
- Contents
- Introduction
- What is P-touch Template 2.0?
- 1. Using P-touch Template 2.0
- 2. P-touch Template Settings Tool User’s Guide
- 3. Examples for Using Commands
- 4. P-touch Template 2.0 Limitations
- 5. Precautions
- 6. Control Command Lists
- 7. P-touch Template Command Details
- ^II Initialize
- ^TS Select template
- ^FF Start printing
- ^CN Specify number of copies
- ^NN Specify number of Numbering copies
- ^ID Initialize template numbering data
- ^PT Select print start trigger
- ^PS Specify print start command text string
- ^PC Specify print start received character count
- ^SS Specify delimiter
- ^CO Select cut options
- ^LS Specify line spacing with line feed
- ^CC Change the prefix character
- ^RC Specify line feed command text string
- ^QS Select print options
- ^QV Specify QR Code version
- ^FC FNC1 replacement setting
- ^OP Perform printer operation (feed)
- ^SR Status request
- ^VR Retrieve version information
- ^CR Line feed in object
- ^OS Select object (object number)
- ^ON Select object (object name)
- ^DI Directly insert object
- 8. Setting and Retrieving Command Details
- ESC iXT2 Select print start trigger
- ESC iXT1 Retrieve print start trigger setting
- ESC iXP2 Specify print start command text string
- ESC iXP1 Retrieve print start command setting text string
- ESC iXr2 Specify print start received character count
- ESC iXr1 Retrieve print start received character count
- ESC iXD2 Specify delimiter
- ESC iXD1 Retrieve delimiter
- ESC iXa2 Specify non-printed text strings
- ESC iXa1 Retrieve non-printed text strings
- ESC iXi2 Select command mode
- ESC iXi1 Retrieve command mode setting
- ESC iXn2 Select template
- ESC iXn1 Retrieve number of selected template
- ESC iXf2 Change the prefix character
- ESC iXf1 Retrieve prefix character
- ESC iXc2 Select cut options
- ESC iXc1 Retrieve cut options
- ESC iXy2 Select cut options (specifying number of labels)
- ESC iXy1 Retrieve cut options (specifying number of labels)
- ESC iXm2 Select character code set
- ESC iXm1 Retrieve character code set setting
- ESC iXj2 Select international character set
- ESC iXj1 Retrieve international character set setting
- ESC iXR2 Specify line feed command text string
- ESC iXR1 Retrieve line feed command setting text string
- ESC iXC2 Specify number of copies
- ESC iXC1 Retrieve number of copies setting
- ESC iXN2 Specify number of Numbering copies
- ESC iXN1 Retrieve number of Numbering copies setting
- ESC iXF2 FNC1 replacement setting
- ESC iXF1 Retrieve FNC1 replacement setting
- ESC iXq2 Specify a print option
- ESC iXq1 Retrieve a Print option value
- ESC iXd2 Specify recovery setting
- ESC iXd1 Retrieve recovery setting
- ESC iXE2 Specify barcode margin setting
- ESC iXE1 Retrieve barcode margin setting
- ESC iXh2 Specify rotated print
- ESC iXh1 Retrieve rotated print setting
- ESC iX^2 Specify print stop position
- ESC iX^1 Retrieve print stop position
- ESC iXv2 (08h) Specify Network Raw port bi-directional communication
- ESC iXv1 (08h) Retrieve a Network Raw port bi-directional communication setting
- ESC iXv2 (0Ch) Specify number of recovery prints
- ESC iXv1 (0Ch) Retrieve number of recovery prints
- ESC i DC1 SQ(01h) Specify self-printing QR code content
- ESC i DC1 SQ(00h) Retrieve self-printing QR code content
- ESC i DC1 SR(01h) Select setting change lock
- ESC i DC1 SR(00h) Retrieve setting change lock
- 9. Setting and Retrieving Command Details (Raster mode)
- 10. Printer Control Command Details
- 11. ZPL II Emulation Support Commands
- 12. CPCL Emulation Support Commands
- 13. EPL Emulation Support Command
- 14. DPL Emulation Support Command
- Appendix A: Supported Printers
- Appendix B: Specifications
- Appendix C: Character Code Tables
- Appendix D: Troubleshooting
- Appendix E: Introducing the Brother Developer Center
- brother US ENG
P-touch Template 2.0 Command Reference
- 46 -
7. P-touch Template Command Details
^CO Select cut options
ASCII: ^ C O n1 n2 n3 n4
Hexadecimal: 5E 43 4F nh1 nh2 nh3 nh4
Parameters
0≤n1≤1
0≤n2≤9
0≤n3≤9
0≤n4≤1
Description
Specifies the various cut options.
n1:
Auto cut setting
(ON: 1 (default); OFF: 0)
(n2*10)+n3:
Auto cut label number setting (1 to 99)
(Default value: 1)
n4:
Cut at end setting
(ON: 1 (default); OFF: 0)
This command is a dynamic command.
This command is applied to only a printer with auto cutter.
Remarks
The auto cut label number setting can be between 1 and 99.
This command becomes invalid if any other value has been specified.
Example
To cut after every two labels:
Since the auto cut setting will be set to ON and the auto cut label number will be two labels, n1=1, n2=0
and n3=2. Therefore, the command will be as follows.
^ C O 1 0 2 0
(5Eh 43h 4Fh 31h 30h 32h 30h)