Software User's Guide
Table Of Contents
- SOFTWARE USER’S GUIDE Label Printer TD-series
- Introduction
- Table of Contents
- 1 Installing and Uninstalling P-touch Editor and P-touch Update Software
- 2 Customizing Labels
- 3 Creating Labels
- 4 How to Use P-touch Editor
- 5 How to use P-touch Transfer Manager & P-touch Library
- Using P-touch Transfer Manager
- Transferring the label template to P-touch Transfer Manager
- Starting P-touch Transfer Manager
- Transferring templates or other data from the computer to the printer via USB
- Transfer the templates to the printer via network (TD-2120N/2130N/4100N only)
- Backing up templates or other data saved in the printer
- Deleting all the printer data
- Using P-touch Library
- Using P-touch Transfer Manager
- 6 Transferring label templates with P-touch Transfer Express
- Preparing P-touch Transfer Express
- Transferring the label template to P-touch Transfer Manager
- Saving the label template as a Transfer Package file (.pdz)
- Distributing the Transfer Package file (.pdz) and P-touch Transfer Express to the user
- Transferring the Transfer Package file (.pdz) to Brother printer
- 7 Printing the list of label templates
- 8 Printing labels using P-touch Template
- 9 Updating P-touch Editor (all models) / Updating the Firmware (TD-2020/2120N/2130N only)
- 10 Printing labels distributed to multiple printers
- Appendix
- brother US ENG
Printing labels using P-touch Template
72
8
b Make sure that the printer is connected to the computer, and then transfer the label layout to the
printer.
1 Click [File]-[Transfer Template] to start Transfer Manager.
NOTE
Select the label layout from the list, and then right-click it to display a menu.
Click [Key Assign] to select a key number.
This is the label template number that will be used when printing.
2 Click [Transfer] to transfer the label layout to the printer.
c Connect the barcode reader.
For details on making connections, refer to Connecting a barcode reader on page 63.
d Print the label.
1 With the barcode reader, scan the “P-touch template command (Initialize + begin specifying
settings)” barcode.