Software User's Guide
Table Of Contents
- SOFTWARE USER’S GUIDE Label Printer TD-series
- Introduction
- Table of Contents
- 1 Installing and Uninstalling P-touch Editor and P-touch Update Software
- 2 Customizing Labels
- 3 Creating Labels
- 4 How to Use P-touch Editor
- 5 How to use P-touch Transfer Manager & P-touch Library
- Using P-touch Transfer Manager
- Transferring the label template to P-touch Transfer Manager
- Starting P-touch Transfer Manager
- Transferring templates or other data from the computer to the printer via USB
- Transfer the templates to the printer via network (TD-2120N/2130N/4100N only)
- Backing up templates or other data saved in the printer
- Deleting all the printer data
- Using P-touch Library
- Using P-touch Transfer Manager
- 6 Transferring label templates with P-touch Transfer Express
- Preparing P-touch Transfer Express
- Transferring the label template to P-touch Transfer Manager
- Saving the label template as a Transfer Package file (.pdz)
- Distributing the Transfer Package file (.pdz) and P-touch Transfer Express to the user
- Transferring the Transfer Package file (.pdz) to Brother printer
- 7 Printing the list of label templates
- 8 Printing labels using P-touch Template
- 9 Updating P-touch Editor (all models) / Updating the Firmware (TD-2020/2120N/2130N only)
- 10 Printing labels distributed to multiple printers
- Appendix
- brother US ENG
Printing labels using P-touch Template
67
8
NOTE
• Settings can be specified for multiple parameters.
• If no settings are specified, labels will be printed according to the settings specified in the P-touch
Template Settings tool. The default settings for P-touch Template Settings is a single copy with “Auto cut
on”. For details on P-touch Template Setting Tool, download “P-touch Template manual” (English only)
from the following website.
http://solutions.brother.com/
[Select your region/country] - Choose your product - [Downloads]
• To specify the number of copies to be printed, scan the “Number of copies” barcode, and then scan the
barcodes under “For entering numbers” to specify a three-digit number. The setting is automatically
applied when three digits have been specified.
Example:
Specify numbers by scanning barcodes as follows: 7i[0][0][7], 15i[0][1][5]
• To change the setting for the number of copies, scan the “Number of copies” barcode again, and then scan
the barcodes for the new three-digit number.
f Scan the “Select template” barcode, and then scan the barcodes under “For entering numbers” to specify
the [Key Assign] number (three digits) for the barcode template.
NOTE
• The setting is automatically applied when three digits have been specified.
Example:
Specify numbers by scanning barcodes as follows: 7i[0][0][7], 15i[0][1][5]
• If P-touch Editor 5.0 has been used to create and print barcodes “^TS007” or “^TS015” (for the above
examples), scanning those barcodes reduces the number of barcodes that will need to be scanned.
• To change the number, scan the “Select template” barcode again, and then scan the barcodes for the new
three-digit number.
g Scan the barcode whose data is to be used.
h Scan the “Begin printing” barcode.
i The barcode is printed with the protocol and size specified in the template.
(CODE128/9-digit)